High Resolution Monochrome Digital Camera

t

The JEC6222 b/w camera is rich in selectable features such as switchable AGC and switchable gamma, selectable shutter speed and flickerless mode, providing more flexibility during configuration. The cameras also save installation time while enhancing captured images thanks to a back focus mechanism.

All lens options are supported, including C and CS, Auto-Iris (AI) and Direct Drive (DD).

The JEM6222 is a product member of the Javelin Pro Series. Javelin’s competitively priced product line includes everything needed for a complete CCTV security system. The Javelin Pro Series offers one-source shopping, the most economical way to select from an industry-leading, full-service product line.

Javelin’s leading-edge product warranties are our pledge to stand behind everything we sell. Every Javelin camera features a two year warranty.

Features
Digital Signal Processing provides crisp, clean images
580 TVL
.08 Lux @ F1.2
Back focus mechanism for ease of installation
Flexible configuration due to high volume of selectable features
All lens options supported, C and CS, Auto Iris (AI) and Direct Drive (DD)

Sensors
  Sony Hyper-HAD™ 1/2" CCD with a micro-lens over each pixel

Effective Pixels
  752 (H) X 582 (V)

Sensitivity
   0.1 lux at minimum scene illumination for usable picture with AGC and lens at fl.2 (80% scene reflectivity) Useful IR response.

Resolution
   580 TVL equivalent

Electronic Shutter Speeds
  These can be set to 1/50, 1/125, 1/250, 1/500, 1/1000, 1/2000, 1/4000, 1/10 4. The camera also has a FLICKERLESS shutter speed for minimizing flicker under fluorescent lights

Exposure
  Automatic exposure is set according to:
Standard Mode - monitors light level over whole frame
Back Light Compensation (BLC) Mode - weights light level compensation more towards the center of the screen
White Spot Mode - diminishes influence of bright spots in the frames

Exposure Compensation
  The exposure is compensated by one of the three following methods:
Electronic Iris (EI) - Internally compensates for scene illumination by automatically adjusting electronic shutter speed between 1/50 to 1/105s
Auto-Iris Lens Drive (AI) - For controlling an auto-iris lens a 3-terminal, spring loaded, quick-release clip connector is provided
Direct Drive (DD) - For controlling a direct-drive lens an output-connector is provided. When using a DD lens the video level can be adjusted using the lens-level pot. A spare plug is provided for lenses without one

Video
  1V pk-pk composite video via 75 ohm BNC connector;

Signal to Noise Ratio
  Better than 48dB weighted (pk-pk signal / RMS noise)

Synchronization
  Four methods are provided on the (FIX, ADJ, GENLOCK, INT): Line-lock (LL) locks the camera frame rate to the frequency in fixed (FIX) mode or can be adjusted to ±120° of the phase in adjust (ADJ) mode. GENLOCK synchronizes the camera to another video-signal or sync-train. A BNC connector is provided on the rear of the camera for this purpose. Internal (INT) locks the camera frame rate to its own crystal oscillator

Gamma Correction
  Selectable, 0.8 or 0.45

Lens
  Any 1/2", 2/3" or 1" ‘C’ or ‘CS’ mount lens. Note: the maximum back extension on a lens is 11mm

Camera Focus
  This may be adjusted from two positions (top and side) and allows use of both ‘C’ and ‘CS’ mount lenses

Camera Mounting
   1/4" BSW threaded holes top and bottom

Power Supply
  Automatic selecting power-supply between 12V DC and 24V AC Consumption:<5 Watts. Power is indicated by a green LED on the back panel

Dimensions
   5.2" (L) X 2.4" (H) X 2.6" (W); 132 (L) X 60 (H) X 67 (W) mm

Weight
  1.2 lbs.; 0.55 kg

Material
  Aluminum extruded body with die-cast lens mount and ABS plastic front trim and rear bezel

Color
  Oyster White.