The camera shall be a solid state color video camera. The pick-up device shall be a 1/3" interline transfer charge coupled device (CCD) with equal to or greater than 250,000 picture elements. Video output shall be provided through a BNC-type connector. Composite video output shall be 1.0V p-p with 75 Ohm impedance and shall be NTSC standard color video signal format. The camera shall have provisions for back-light compensation. The camera shall accept C or CS type lenses without additional requirement for adapter ring. The camera shall be capable of supporting auto-iris lenses (both DC-type and Video-type). The camera shall have provisions for an easy to use back-focus adjustment. Back-focus adjustment must be achieved without the use of any tools.

The camera shall have an internal isolation transformer.

The dimensions of the camera shall be 2-3/4"(W) X 2-23/64"(H) X 5"(D). The camera shall have an extruded aluminum case. Camera mounting shall be performed via a 1/4" X 20 threaded hole in the camera casing. The camera shall be capable of being mounted either from the top or bottom. Camera weight shall not exceed 26 ounces. Ambient operating temperature shall be +14 degrees to +122 degrees Fahrenheit. The ambient operating humidity shall be 30% - 90%. Image resolution shall be a minimum of 330 lines horizontal and 350 lines vertical. Synchronization shall be achieved via either internal or external line-lock and there shall be provisions for vertical phase adjustment. Signal-to-noise ratio shall be more than 46dB. The sensitivity of the camera shall render a minimum subject illumination of 0.3 Lux (F1.2).

Camera shall be powered by a 24 VAC, 60Hz power source. Camera shall have the capability of operating at 24 VAC, 50Hz. Power consumption shall not exceed 5.5W.