1/3" FORMAT
CCD BLACK AND WHITE CAMERA
The camera shall be a solid state black and white video camera. The
pick-up device shall be a 1/3" interline transfer charge coupled
device (CCD) with equal to or greater than 250,000 picture elements. Video
output shall be provided through a BNC-type connector. Composite video
output shall be 1.0V p-p with 75 Ohm impedance and shall be EIA RS-170
standard black & white video signal format. The camera shall accept
CS-type lenses and be capable of supporting auto-iris type lenses
(video-type & DC type).
The camera shall have an internal isolation transformer.
The dimensions of the camera shall be 2.76"(W) X 2.36"(H) X
5.04"(D). The camera shall be enclosed in an extruded aluminum case.
Camera mounting shall be performed via a 1/4" X 20 threaded hole in
the camera casing. The camera shall be capable of being mounted either
from the top or bottom. Camera weight shall not exceed 24.7oz. Ambient
operating temperature shall +14 degrees to +122 degrees Fahrenheit.
Ambient operating humidity shall be 30% to 90%.
Camera resolution shall be a minimum of 400 TV lines horizontal and 350
TV lines vertical. Synchronization shall be achieved via line-lock 24
volts AC 50/60Hz. There shall be provisions for vertical phase adjustment.
Signal-to-noise ratio shall be 50dB. AGC shall be automatic and provide a
minimum 12dB gain. The sensitivity of the camera shall render a minimum
subject illumination of 0.22 Lux (F1.2). The camera shall have auto
electronic shutter capable of 1/100,000 second. The camera shall also have
provision for backlight compensation.
Camera shall be powered by a 24 VAC, 50/60Hz power source. Power
consumption shall not exceed 5.5 W. The camera shall be UL and CUL
approved.
New CCD controlled back-light compensation
